De skaaimerken fan stiennen fineer

Would seem a pretty simple question right? And yes, it’s a pretty simple answer – cladding made from stone.  However from the meetings I have with contractors and surveyors, I see it often gets over-complicated in designers’ minds and confused with traditional stone masonry.

Natural stone is one of the oldest materials used by man in construction.  We only have to look at buildings such as the Taj Mahal completed in 1648 using white marble, or the Great Pyramid thought to have been completed in 2560BC made predominantly out of limestone to appreciate the longevity of stone as a material.  (Imagine the architect specifying the Design Life for the Pyramid….)

Boumetoaden binne fansels feroare sûnt se de Taj Mahal bouden, en tanksij ferskate sektoaren en hannelingen yn 'e bousektor, krúsferwizings en netwurken yn' e rin fan 'e jierren, hoege wy net langer swiere stiennen blokken op inoar te steapele om it uterlik te meitsjen fan in solide stiennen gebou. 

Traditional stone masonry (not something we do here at AlterEgo by the way), is loaded onto the building’s foundations and uses stones and mortar, tied back with wall-ties – think brickwork.

Moderne dei stiennen beklaaiïng oan 'e oare kant wurdt ophongen fan' e boustruktuer, en wurdt op deselde manier yn 'e mande brocht as in metalen reinscreensysteem. 

Jo sjogge, stiennen beklaaiïng, is in reinscreen beklaaiïng systeem en moat as sadanich behannele wurde. 

Looking through a cross section of a typical stone cladding build-up you’ll see lots of familiar components: spreader bars, helping-hand brackets, rails and T-bars.  It’s only the facing material which is interchangeable. 

There are a few nuances when working with natural stone for the first time, but nothing that a day’s training and our on-site support won’t cover.

So if you’re a contractor used to installing aluminium and steel cladding or you specialize in terracotta; don’t be afraid of stone! Check out this video showing the simplicity of our EGO-02S system EGO 02s INSTALLATION BETA – YouTube

As it giet om it befestigjen fan it stiennen paniel oan 'e stipestruktuer, binne d'r twa haadmetoaden foar befestiging:

Undercut ankers

With an undercut anchor system, typically used for larger format panels, holes are pre-drilled into the back of the stone, a sleeve and bolt inserted and fixed onto a hanging clasp and horizontal system.  This method is good for natural stone panels with a thickness range from 30-50mm and can be used in both stack and stretcher bond layouts, typically in a portrait layout.   Undercut anchors are always used in soffit situations.

Om't de befestigingen allegear op 'e efterkant fan it paniel binne, is dizze metoade folslein geheime fix, gjin befestigingen binne sichtber.

Carve

The kerf method of fixing stone is where a continuous groove is cut in the top and bottom of the stone, and the stone simply sits on a rail or clasp at the bottom and restrained at the top.  A kerf system works particularly well for horizontally laid panels in either stack or stretcher bond.

De snelheid en ienfâld fan ynstallaasje en keppele oan it feit dat panielen kinne wurde ynstallearre net-sequentially makket dizze metoade de meast brûkte stien cladding systeem.

Beide ynstallaasje metoaden binne typysk iepen-jointed, lykwols wizende gewrichten mei in net-migrearjende sealant kin jaan it uterlik fan in tradisjoneel mitselwurk gebou. 

If you’re considering stone for your next project, please get in contact.